Oxygen compatible lubricant
Convenient syringe applicator
Two ounces of lubrican
Meets
the specification ments and has been qualified under Military
Specification MIL-PRF-27617F Types I, II and III. Has been adopted as
the preferred oxygen compatible or enriched air (Nitrox) lubricant by
most breathing apparatus equipment manufacturers.
Has been tested and approved by NASA for use in liquid and gaseous oxygen (LOX/GOX) systems up to 10,000psi.
NSF H-1 lubricant (Food Grade approval for incidental )
Is recommended for use on static or dynamic seals in either open or closed circuit diving system.
Made In USA
CHRISTO-LUBE
fully fluorinated lubricants are compatible with both liquid and
gaseous oxygen (LOX/GOX) and exhibit unsurpassed lubricity even in the
coldest environments. A little CHRISTO-LUBE goes a long way and
therefore we recommend to use sparingly.
Air Force MIL-PRF-27617F Grease, Aircraft and Instrument, Fuel and Oxidizer Resistant
(This
specification covers the ments of greases resistant to hydrocarbon fuel
and liquid oxygen and for use as lubricants in aircraft, aerospace
vehicles, and supporting equipment)
CHRISTO-LUBE MCG 111
Meets
the specification ments and has been qualified under Military
Specification MIL-PRF-27617F, Types I, II and III. CHRISTO-LUBE MCG 111
is a chemically inert, oxygen compatible, wide operating temperature
range perfluoropolyether grease which was developed for use in systems
non-reactivity with harsh chemicals including strong acids and
oxidizers, fuels and solvents is an important factor. Uses for
CHRISTO-LUBE MCG 111 all types of life support systems, including open
and closed circuit diving systems, aviation oxygen, hyperbaric chambers
and medical gas regulators. Other uses instrumentation, pneumatic
cylinders, electrical s and switches. Please refer to technical data
sheet for typical performance properties.