XS Scuba PVD Pro Valve 3442psi
XS Scuba’s Physical Vapor Deposition (PVD) Finish Pro Valve has the same type of long lasting finish you find on expensive faucets, high-end door lock sets and premium watches. PVD is not only a beautiful finish, but is also extremely durable. Before assembly th..
BC Washout Hose
Wash the inside of your buoyancy compensator to remove the build up of salt crystals and foreign deposits.
Fits hose mount inflators and also bladder mounted inflators with standard male QD nipple
Fill about half way with fresh water to fully rinse inside
Give the B..
XS SCUBA Ankle Weight Assy – 1.0lb set WA10
Ankle Weights
Filled with hardened #5 round shot
RynoHyde neoprene cover for durability
Adjustable nylon strap
High quality quick-release Nexus buckles
Perfect for adjusting your trim
Sold in pairs
..
XS SCUBA Highland Deluxe Inline Shuf Off-Low HL404-DLX
Install between standard regulator hose and second stage
Slide machined Delrin collar to shut off gas flow
Commonly used with deco rigs, stage bottles & drysuit inflation
Prevent critical gas loss
9/16”-18 UNF ..
First Stage Quick Disconnect
Quick and convenient way to change hose lengths between dives
Installs between 1st stage and LP regulator hose
Lock-down screw to prevent accidental disconnection
Flow rate = 800 lpm
Low-pressure use only – below 200 psi
..
XS Scuba Swivel LP Port Adapter, 1 to 3 Ports
Do you need more low-pressure ports on your Scuba regulator? XS Scuba’s Swivel LP Port Adapter lets you connect from 1 to 3 hoses from one low-pressure port of your first stage regulator. Adapter has (1) 3/8-24 male inlet to (3) 3/8-24 female outl..
XS SCUBA PAINTBALL TRANSFILLER AC390
Allows filling of a paintball cylinder from a scuba cylinder
Attach to K and DIN scuba valves
Components:
Twist Bleed Screw (p/n AC361)
Stainless steel bleed screw
Positive seal PDVF seat
Easy replacement bleeder screw
Com..
Easy Gripper
Make your QD coupler easier to operate
Helps when wearing thick gloves
Wide, easy to grip collar
Flat side to prevent clearance issues
Fits over most standard quick-disconnect hose ends
Not for use on XS Scuba’s Easy Grip Wide Collar QD Hoses
..
XS Scuba Tank Muffler
When you need to empty a cylinder for visual inspections, transporting for travel or when valve maintenance is required you need a tank muffler. Tired of the overbearingly loud and high-pitched sounds of draining a Scuba tank? The sound of a draining Scuba cylinder can cause..
• Adjust the low pressure orifice while the second stage is pressurized
• Two drives allowing compatibility with nearly all second stages
• Reversible, one end with with a 0.32” slotted drive and the other with a tapered 5mm hex drive
• Low pressure gauge included for display of the intermediate ..
XS Scuba Star Tool - Stainless Steel:
Remove and Replace the Most Common Scuba Hoses
Wrenches: 1/2", 9/16", 5/8"& 11/16"
Hex Wrenches: Most Common 5/32", 3/16"& 1/4"..