All Products
Brand: XS-SCUBA
Model: TL-121
• Adjust the low pressure orifice while the second stage is pressurized
• Two drives allowing compatibility with nearly all second stages
• Reversible, one end with with a 0.32” slotted drive and the other with a tapered 5mm hex drive
• Low pressure gauge included for display of the intermediate ..
Rp2,215,000
Brand: XS-SCUBA
Model: AC390
XS SCUBA PAINTBALL TRANSFILLER AC390
Allows filling of a paintball cylinder from a scuba cylinder
Attach to K and DIN scuba valves
Components:
Twist Bleed Screw (p/n AC361)
Stainless steel bleed screw
Positive seal PDVF seat
Easy replacement bleeder screw
Com..
Rp1,720,000
Brand: XS-SCUBA
Model: CL-14
Mini retractor size
Attach to diver with Delrin/stainless steel snap hook
Attach to gear with stainless steel split ring
Recommended for slates, single computer, and small flashlights (2C to 4AA size)
Dimensions1.5 x 1.3 x 0.4 in38 x 33 x 10 mm
p/nCL14
..
Rp320,000
Brand: XS-SCUBA
Model: CL-19
New micro size, our smallest retractor yet• Attach to diver with Delrin snap hook• Attach to gear with stainless steel split ring• Built-in quick-release buckle• Extension: 36” braided polyester cord - 50# break strength• Pull force: 3 ounce• Retractor dimensions:..
Rp220,000
Brand: AMSCUD
Model: AC916
LP Hose Splitter
Attach to the second stage end of one low pressure regulator hose
Allows the attachment of two low pressure regulator hoses (first stage ends)
One 9/16”-18 male inlet to two 3/8”-24 female outlets
Chromed brass construction with Viton O-ring
..
Rp460,000 Rp615,000
Brand: XS-SCUBA
Model: AC-050
XS Scuba Standard 50 lbs. (23 kg) Lift Bag
You just found a 25 lbs. (11.3 kg) davenport anchor and can’t figure out how you can get this prize back to the surface. You need a lift bag. You never know what you’re going to find on a dive that is worth money, so always pack a lift bag wh..
Rp850,000
Brand: XS-SCUBA
Model: GS-100
XS Scuba LED Glowstick: Stop Buying & Throwing Away One-Time Use Chemical Sticks Locate Buddy Underwater Easier at Night Great for Night Diver, Cave Diver, Wreak Diver or Dive in Low Light Conditions Fourteen Light-Emitting Fibers Illuminate Entire Glowstick High-Visibility Light ..
Rp396,000
Brand: XS-SCUBA
Model: CL-16
The XS Scuba House Mount Retractor CL16 is a mini size retractor made for attaching a hose mount compass or computer for easy access without clutter. The XS Scuba House Mount Retractor CL16 attaches to diver with a stainless steel split ring or Delrin snap hook. The extension is made of coated stain..
Rp360,000
Brand: XS-SCUBA
Model: HL404-DLX
XS SCUBA Highland Deluxe Inline Shuf Off-Low HL404-DLX
Install between standard regulator hose and second stage
Slide machined Delrin collar to shut off gas flow
Commonly used with deco rigs, stage bottles & drysuit inflation
Prevent critical gas loss
9/16”-18 UNF ..
Rp750,000
Brand: XS-SCUBA
Model: CL-18
Standard size retractor
Lock the cable open, closed or anywhere in the middle
Attach to gear with stainless steel split ring or nylon lanyard
Attach to diver with Delrin snap hook attachment
Dimensions2.6 x 2.2 x 0.8 in66 x 56 x 20 mm
p/nCL18
..
Rp470,000
Brand: XS-SCUBA
Model: AC998
First Stage Quick Disconnect
Quick and convenient way to change hose lengths between dives
Installs between 1st stage and LP regulator hose
Lock-down screw to prevent accidental disconnection
Flow rate = 800 lpm
Low-pressure use only – below 200 psi
..
Rp930,000
Brand: XS-SCUBA
Model: AC155
Easy Gripper
Make your QD coupler easier to operate
Helps when wearing thick gloves
Wide, easy to grip collar
Flat side to prevent clearance issues
Fits over most standard quick-disconnect hose ends
Not for use on XS Scuba’s Easy Grip Wide Collar QD Hoses
..
Rp48,000